The S Bench-Top Thermal Stripper is the latest innovation from FITEL for factory-based regular and high-strength , and µm coating diameter, µm cladding diameter Ribbon fibers: fiber ribbons, S series Optical Fiber Thermal Stripper Author. the back of the Thermal Stripper for setting values). 4. Increase the time if stripping process is not smooth and the fiber does not strip cleanly. Fiber Diameter (µm) Time Setting Temperature Setting ( coating) 3 9 ( coating) 5 9. Cleaning 19 Cleaning Debris will build up behind the blade as well as on the heating element. Because of the single blade construction, it can easily strip large diameter conductors and jackets including irregular shaped cross sections without nicking sheild or conductor strands. The HOTnife® Thermal Stripper is used with the M power supply and has a useable temperature range from ºF (ºC) to ºF (ºC).
The hand unit is shaped like a pair of cutoff tweezers and weighs less than 2 ounces 57g including cable and connector. The small size and light weight have proved in production use to be very effective in increasing output and reducing operator fatigue. The head is fabricated from a high-strength, high-temperature alloy with very good oxidation and wear properties. Hermetic sealing of the filaments in a high-temperature alloy offers several advantages. The filament is resistant to oxidation. The stripping head will not disort nor lose alignment as is the case with ordinary thermal stripper for 3 4 diameter